Service Manuals
Please
log in or
register to download service manuals.
Case Studies
-
Airports
-
Military/Secured Site
-
Public Space
-
Rail
-
Roads & Tunnels
-
Sea Ports
X-Net Gigabit Media Convertor
X-Net Gigabit Media Convertor
X-Net Gigabit Media Convertor
A gigabit Ethernet to fibre media converter for mixed copper/fibre environments.
The X-Net Media Converter converts media transmission between UTP Copper cablings and fibre SFP (Small Form-Factor Pluggable) Transceivers. The copper-to-fibre module is 1000 Mbps Gigabit Ethernet type, allowing seamless integration between Fast/Gigabit Ethernet networks using unshielded twisted pair (UTP) copper cabling and Gigabit fibre networks.
Features & Benefits
Long-haul Gigabit Ethernet - The X-Net Media Converter is the most cost-effective, flexible solution for mixed copper/fibre environments like LANs, campus networks or even Metropolitan Area Networks.
Easy Installation - The Auto-negotiating Ethernet function empowers the Gigabit RJ-45 port on X-Net Media converter to negotiate transmission speed and mode with peer devices automatically; and the Auto-crossover Ethernet port ensures seamless integration with third party devices.
Easy Troubleshooting - With the Link Loss Forwarding mechanism activated, any detected broken link on the RJ-45 Ethernet port will force the fiber port to take over, and the fibre uplink port will stop transmitting then "turned off" as soon as the remote link is down.
Easy Integration - The X-Net Media Converter module uses the common X-Net rack, thus providing uncompressed digital video transmission directly over fibre and IP video transmission over fibre from the same rack. This allows easy mix n match of uncompressed and compressed digital modules while minimizing the cost of additional infrastructure.
Technical Specification
| Standards Compliance |
|
IEEE802.3 10BASE-T
IEEE802.3u 100BASE-TX
IEEE 802.3ab 1000Base-T
IEEE 802.3z 1000Base-SX/LX standards
IEEE802.3x Flow Control and Back pressure |
| Connector & Interface |
| RJ-45 |
CAT-5(100/1000Mbps) Twisted Pair cable Auto MDI/MDI-X and Auto-Negotiation Support |
| Fibre |
LC (SFP 3.3V) |
| Link Loss Forward |
| Tx To Fibre |
If TX port link is broken, then converter will force the fibre to link down. |
| Fibre to Tx |
If Fibre port link is broken, the media converter will force the TX port to link down. |
| DIP Switch |
| DIP Switch 1 |
Fiber Auto-Negotiation/1000Mbps Full Duplex mode |
| DIP Switch 2 |
TX to Fiber LLF(Link Lose Forwarding) Disable/Enable |
| DIP Switch 3 |
Fiber to TX LLF(Link Lose Forwarding) Disable/Enable |
| Environmetal |
| Operating temperature |
0 °C to +45 °C |
| Storage temperature |
-10 °C to +70 °C |
| Humidity |
10% ~ 90%, non-condensing |
| Mechanical |
| Dimensions |
6HP x 4U x 167mm |
| Power requirements |
| Standalone |
DC 12V/0.7A |
Top